Implementasi Kontrol PI pada Sistem Water Spray Finish Mill untuk Optimasi Konsumsi Air
DOI:
https://doi.org/10.55606/teknik.v6i2.11327Keywords:
Kontrol PI, Water Spray, Finish Mill, Efisiensi AirAbstract
Abstract. The water spray system in a finish mill plays a vital role in maintaining material temperature and grinding process stability. Manual control often causes fluctuations in the outlet temperature, leading to suboptimal operations and excessive water consumption. This study aims to implement a Proportional-Integral (PI) control on the water spray system to improve thermal stability and water use efficiency. The methodology includes designing the control system, determining parameters through a tuning process, and testing system performance by comparing conditions before and after implementation. The results show that PI control significantly reduces temperature deviation and accelerates system response time compared to conventional control. By maintaining the product output temperature at a stable setpoint, the application of PI control is proven to reduce water consumption by up to 20%. These findings indicate that the system can operate more optimally without compromising product quality. The implications of this research confirm that PI control is effective in increasing resource efficiency and has high potential for standardization across other grinding units in the cement industry.
References
Adhiksana, A., Murdiyat, P., Rahman, A., Cahyani Fitri, A., Prayoga, B., Jumardi, A., … Migas Balikpapan, S. (2025). Penerapan Kontroler PID pada Sistem Kendali Level Cairan dengan Metode Ziegler-Nichols Berbasis Arduino. 06(02). https://doi.org/10.46964/poligrid.v6i2.166
Akbar, A. H., Ma’arif, A., Rekik, C., Abougarair, A. J., & Mekonnen, A. M. (2024). Implementing PID Control on Arduino Uno for Air Temperature Optimization. Buletin Ilmiah Sarjana Teknik Elektro, 6(1), 1–13. https://doi.org/10.12928/biste.v6i1.9725
Ali Fikri Haiqal, M., Rukslin, Ajiatmo, D., & Ali, M. (2023). Optimasi Thermal Oil Heater Menggunakan ACO Sebagai Tunning PID Controller. Nucleus Journal, 2(1), 1–11. https://doi.org/10.32492/nucleus.v2i1.2101
Hadhiwibowo, A., Agustina, N., Hidayat, I., Ramadhan, T. Z., & Safira, R. A. (2025). Silvi Nurlaili 7 , Silfani Mega Aulia 8 , Asma Nadia Fauzan 9. Rika Andriyanti Dinata, 07, 11.
He, J., Su, S., Wang, H., Chen, F., & Yin, B. J. (2023). Online PID Tuning Strategy for Hydraulic Servo Control Systems via SAC-Based Deep Reinforcement Learning. Machines, 11(6). https://doi.org/10.3390/machines11060593
Parapat, R. Y., Haloho, G. R., & Pramita, N. S. (n.d.). PERANCANGAN SISTEM PENGENDALIAN PROSES UNTUK PRODUKSI MINYAK DIESEL MELALUI PIROLISIS OLI BEKAS. Retrieved from https://journal.hasbaedukasi.co.id/index.php/jurmie
Purnomo, A., Yanuar, P., Yatimah, D., An-Nizhami, A., Pramono, A., & Khoryanton Jurusan Teknik Mesin Politeknik Negeri Semarang Jl Sudharto, A. (2022). Rancang Bangun Penyemprot Udara Otomatis Berbasis Electropneumatic Menggunakan Sensor Infrared BF4R. In Jurnal Rekayasa Mesin (Vol. 17). Retrieved from https://jurnal.polines.ac.id/index.php/rekayasa
Rasyid, T. A., Divanny, S. R., Saputra, K. R., Rizqi, M., Arifuddin, D., Hazmi, H. A., & Priambodo, A. S. (2024). Pengendalian RPM pada Motor DC Encoder dengan PID Controller berbasis Simulink. In JTE UNIBA (Vol. 8).
Sholeh, F. dilla, Suryatini, F., Wisma Nugraha, N., & Lilansa, N. (2025). Water Temperature Control System With PID Control Method and Fuzzy Logic Based on SCADA. Emitor: Jurnal Teknik Elektro, 177–183. https://doi.org/10.23917/emitor.v25i2.11064
Supriyadi, M. R. K. P., Yuliatin, U., & Triyanto, R. H. (2024). Rancang Bangun Sistem Pengendalian Temperature Vessel Dengan PID Controller Menggunakan Metode Tuning Direct Synthesis dan Monitoring pada Labview Berbasis Arduino. Bit-Tech, 7(2), 377–386. https://doi.org/10.32877/bt.v7i2.1823
Susetyo Yulianto, E., Yuniardi, D., & Harfit, A. R. (2023). SYSTEM DEVELOPMENT FOR ENHANCING BOILER PERFORMANCE: FROM PID CONTROL TO ADAPTIVE AND MODEL PREDICTIVE CONTROL FOR MORE EFFECTIVE OPTIMIZATION OF TEMPERATURE, PRESSURE, AND LEVEL CONTROL IN BOILER SYSTEM. ISSN(2), 14–23. https://doi.org/10.56127/ijst.v
Yolandha Parapat, R., Khodarrohmah, N., Ama Della, S., & Nurul Fitri, S. (2026). STRATEGI PENGENDALIAN TEMPERATUR DAN TEKANAN UNTUK MENINGKATKAN KINERJA PROSES PIROLISIS. Integrative Perspectives of Social and Science Journal (IPSSJ) |, 3(2), 1.
Zhang, S. (2025). Research on the Application of PID Control Algorithm and Fuzzy Control Theory in the Field of Temperature Control. https://doi.org/10.54254/2755-2721/117/2025.19948
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2026 Jurnal Teknik Mesin, Elektro dan Ilmu Komputer
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
