Analisis Pemeliharaan Mesin Injection I49 Menggunakan Metode Reliability Centered Maintenance (RCM) Di PT. Yamatogomu Indonesia
DOI:
https://doi.org/10.55606/teknik.v5i2.7570Keywords:
RCM, FMEA, LTA, Mesin Injeksi, PemeliharaanAbstract
Abstract. This research was conducted at PT. Yamatogomu Indonesia with a focus on the I49 Injection machine that experienced high downtime. The objective of the research was to analyze the causes of machine failure and design an appropriate maintenance strategy. The method used was Reliability Centered Maintenance (RCM) supported by Failure Mode and Effect Analysis (FMEA) and Logic Tree Analysis (LTA). The FMEA results identified five main failure modes with a total Risk Priority Number (RPN) value of 702. The top three modes, namely no heat or excessive heat, no vacuum motor pressure gauge indicator, and compound puller motor malfunction, contributed 76% of the total risk. Based on LTA, all failure modes were classified as evident and did not have a direct impact on safety, but could disrupt operations. The maintenance strategies implemented consisted of Condition Directed (CD), Time Directed (TD), and Failure Finding (FF), with the majority of actions (60%) being CD. These results can be the basis for developing a more effective maintenance schedule to minimize downtime and increase production efficiency.
References
Alsakina, A., & Momon, A. (2023). Analisis Perawatan Mesin Injection dengan Metode RCM pada Perusahaan Manufaktur. STRING (Satuan Tulisan Riset Dan Inovasi Teknologi), 8(1), 20. https://doi.org/10.30998/string.v8i1.16089
Bangun, I. H., Rahman, A., & Darmawan, Z. (2014). Perencanaan Pemeliharaan Mesin Produksi Dengan Menggunakan Metode Reliability Centered Maintenance (RCM) II Pada Mesin Blowing OM (Studi Kasus : PT Industri Sandang Nusantara Unit Patal Lawang). Jurnal Rekayasa Dan Manajemen Sistem Industri (JRMSI), 2(5), 997–1008.
Hasan, Indra, Denur, Hakim, L. (2019). 43 Issn: 2354-6751. 6(1), 43–48.
Irfan Faris Rudiana, Enjang Nursolih, & Yulia, L. (2024). ANALISIS PEMELIHARAAN MESIN PRODUKSI DENGAN METODE RCM (Reliability Centered Maintenance) Pada PT. Surya Agrolika Reksa. Jurnal Industrial Galuh, 6(2), 65–74. https://doi.org/10.25157/jig.v6i2.4079
Pranoto, J. (2012). Implementasi Studi Preventive Maintenance Fasilitas Produksi Dengan Metode Reliability Centered Maintenance Pada Sinar Sanata Electronic Industri. Jurnal Teknik Industri Universitas Sumatra Utara, 5(3), 55–66.
Rachman, H., Garside, A. K., & Kholik, H. M. (2017). Usulan Perawatan Sistem Boiler dengan Metode Reliability Centered Maintenance (RCM). Jurnal Teknik Industri, 18(1), 86–93. https://doi.org/10.22219/jtiumm.vol18.no1.86-93
Rasindyo, M. R., Kusmaningrum, & Helianty, Y. (2015). Analisis Kebijakan Perawatan Mesin Cincinnati Dengan Menggunakan Metode Reliability Centered Maintenance Di PT. Dirgantara Indonesia. Jurnal Online Institut Teknologi Nasional, 03(1), 400–410.
Siregar, N., & Munthe, S. (2019). Analisa Perawatan Mesin Digester dengan Metode Reliabity Centered Maintenance pada PTPN II Pagar Merbau. Journal of Industrial and Manufacture Engineering (JIME), 3(2), 87–94. http://ojs.uma.ac.id/index.php/jime
Tammya, E., & Herwanto, D. (2021). Analisis Efektivitas Mesin Debarker Dengan Menggunakan Metode Overall Equipment Effectiveness (OEE) Di PT. XYZ Kuningan, Jawa Barat. Jurnal Sains, Teknologi Dan Industri, 19(1), 20–27.
Wibowo, T. J., Hidayatullah, T. S., & Nalhadi, A. (2021). Analisa Perawatan pada Mesin Bubut dengan Pendekatan Reliability Centered Maintenance (RCM). Jurnal Rekayasa Industri (Jri), 3(2), 110–120. https://doi.org/10.37631/jri.v3i2.485
Yuliandra, B., & Jaeba, K. A. (2017). Perancangan Sistem Informasi Perawatan Mesin Pada PT XYZ. Jurnal Rekayasa Sistem Industri, 6(1), 9. https://doi.org/10.26593/jrsi.v6i1.2423.9-20
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2025 Jurnal Teknik Mesin, Elektro dan Ilmu Komputer
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
